DS-718 / DS-712 Sprayable contact adhesive

The new formula of our DS-718 & DS-712 was developed from the demand for a toluene-free variant of our trusted EPDM contact adhesive. Our DS-718 & DS-712 are suitable for bonding all types of EPDM, i.e. both American and European EPDM and you can also bond Fleeceback roofing membranes with this contact adhesive. 

 

Available in canister, aerosol and can

Not containing toluene or chloride (NC)

High adhesive strength

Long open time

  

Features

DS-718 canister / DS-712 aerosol are contact adhesives without toluene and chlorine-containing components, which gives this adhesive a lower health risk and thus also suitable for retail sales. When protected from contamination, this adhesive offers a long opening time of up to 120 minutes. 

DS-718 canister / DS-712 aerosol are a new development in the field of EPDM and TPO. This adhesive is suitable for bonding EPDM and TPO to various surfaces such as concrete, plywood, OSB boards, other board material and laminated insulation boards. This quality is ideal for permanent joints that require good immediate adhesion, but without toluene. This new EPDM adhesive is therefore also suitable for retail market sales! This EPDM adhesive is suitable for both European and American brand EPDM and can also be used in combination with fleeceback roofing membranes. 

Always test a small sample of materials to assess their suitability for the application. For example, some vinyl/PVC types contain a high level of plasticizers which, over time, can dissolve/soften the adhesive. If in doubt, test first.
Not to be used on flexible PVC or EPS (styrofoam).

✓ Non toluene
✓ Non chloride (NC)
✓ Lower health risk
✓ High adhesive value
✓ Up to 90ºC heat resistant
✓ Dries quick with long open time

Applications
✓ EPDM, TPO and Fleeceback roofing membranes
✓ both American and European EPDM
✓ various metals, most plastics, rubber, concrete